Product Overview
Review the enclosure and external layout of WR2450 for your project.
Dimensions & Weight
- Length
- Width
- Height
- Weight
- ≈ 22 lbs
Downloads
-
Spec Sheet
-
User manual
-
Installation guide
-
Certificate
-
Test report
-
Warranty document
WR2450
Start with the vehicle, vessel or auxiliary circuit in your project.
- Nominal Voltage
- 25.6V
- Nominal Capacity
- 50Ah
- Energy
- 1.28kWh
- Cycle life (catalog)
- 6000+
Product Description
WR2450 uses LiFePO4 battery chemistry. The model specifications list a nominal battery voltage of 25.6V, a rated capacity of 50Ah, a stated energy capacity of 1.28kWh.
Use WR2450 as the equipment reference when comparing drawings, technical specifications and supply documents. Keeping the exact model designation with the project helps the purchaser and installer review the same configuration.
A vehicle or vessel places different demands on its battery while travelling, parked and connected to a charger. Recording those periods separately gives the equipment team a clearer picture than a single daily energy estimate.
Start a fitment review with the host equipment reference and existing charger. A dimensioned drawing can then be checked against the battery compartment, cable route and service access. Confirm each interface for the particular equipment revision before purchasing.
Request the current documents for WR2450 and the destination market. Check the document revision before transferring an electrical limit, dimension or compatibility statement into the project specification.
Enclosure & Installation
The listed model dimensions are 10.24″ × 6.73″ × 8.46″. Use the exact-model mounting drawing to review installation space, cable access and service clearances.
Connection & Interface Review
Match the connection drawing and interface documentation to the exact battery and host equipment configuration.
Battery Configuration
Nominal Voltage: 25.6V; Nominal Capacity: 50Ah; Energy: 1.28kWh. Request the model-specific configuration and technical documentation for your project.
Specifications
Model
WR2450
Product family
Motive Battery
Format
Low-Speed Vehicle
Nominal Voltage
25.6V
Nominal Capacity
50Ah
Energy
1.28kWh
Battery Type
LiFePO4
Dimensions
10.24" × 6.73" × 8.46"
Weight
≈22.0 lbs
Catalog warranty
5 Years
Cycle life (catalog)
6000+
Max. Continuous Charge Current
50A
Max. Continuous Discharge Current
50A
Peak discharge current (5 s)
120A
Ingress protection
IP67
Related Products
Discuss Your Battery Project
Tell us about your requirements for WR2450, your application and project goals.